Monday, December 2, 2013

Building the “Toucan” wooden clock Part 3

Finished with all the small parts and arbors. I made a preassembly to check that everything fits. Although it looks very good I am not happy with several things:

I cut the pinion supports and the wood spacers using a manual saw and even I used a cutting guide in many of the parts the main faces are not parallel Triste

This means that either I work the parts with sand paper or a make all the parts in the CNC milling a flat 1/4” piece of wood. Tomorrow is another day and I will see…

2013-12-03 00.19.532013-12-03 00.20.012013-12-03 00.20.46

1 comment:

  1. We don’t trust this amazing submit. Nevertheless, I saw it gazed for Digg along with I’ve determined you could be appropriate so i ended up being imagining within the completely wrong way. Persist with writing top quality stuff along these lines. zf axle parts

    ReplyDelete

Please be aware that any comment with commercial links will be immediately deleted and declared as SPAM.

If you want to advertise in my blog please contact me to agree in a fee and i will be happy to add your link in the side bar.